Megger TDS40, Руководство по эксплуатации, Страница: 54 / 71

6-54
6.7 Adjustment of the System Time
If the test and diagnosis system is equipped with at least one of the system options
“Logging” or “Protocol printout”, the system contains a battery-operated and crystal-
controlled clock (see section 7.3).
After activating of the Menu key F2 (Fig. 3, item 5) and by turning the knob / push-button
(Fig. 3, item 6) the menu "Date / Time" can be accessed. Here the date and the clock time
of the system timer (test and diagnosis system) can be adjusted. By turning the knob /
push-button, the value of the selected segment is changed. You can toggle through the
segments by pressing the knob / push-button.
After all segments have been set, the date and time can be stored by pressing the F1 key.
By pressing the knob / push-button again, the changes are discarded.
Fig. 38: Setup: Date / Time
Fig. 39: Setup Date / Time: Adjusting the day of the week
Fig. 40: Setup Date / Time: Adjusting the minutes
Fig. 41: Setup Date / Time: Saving by F1
Date/Time
Mo 19.06.08 10:27:13
*
F1= Set! else OK
Date/Time
Mo 19.06.08 10:27:13
*
Set date & time
Date/Time
Mo 19.06.08 10:27:13
*
Set date & time
Date/Time
Mo 19.06.08 10:27:13
F1= Set! else OK