Megger TDS40, Руководство по эксплуатации, Страница: 11 / 71

1-11
Operating Staff
This system and its peripheral equipment may only be operated by trained or instructed
personnel. Anyone else must be kept away.
The system may only be installed and operated by an authorised electrician. DIN VDE
0104 (EN 50191), DIN VDE 0105 (EN 50110) and the German accident prevention
regulations (UVV) define an electrician as someone whose knowledge, experience and
familiarity with the applicable regulations enables him to recognise potential hazards.
Declaration of Conformity (CE)
The product meets the following security requirements of the European Council
Directives:
• EMC Directive (2004/108/EG)
• Low Voltage Directive (2006/95/EG)
1.2 General Safety Instructions and Warnings
Intended application
The operating safety is only guaranteed if the delivered system is used as intended.
Incorrect use may result in danger to the operator, to the system and the connected
equipment.
The limits described under Technical Data may not be exceeded.
Behaviour at malfunction of normal operation
The equipment may only be used when working properly. When irregularities or
malfunctions appear that cannot be solved consulting this manual, the equipment must
immediately be put out of operation and marked as not functional. In this case inform the
person in charge who should inform the Megger-service to resolve the problem. The
instrument may only be operated when the malfunction is resolved.
Five safety rules
The five safetey rules must always be followed when working with HV (High Voltage):
1. De-energise
2. Protect against re-energising
3. Confirm absence of voltage
4. Earth and short-circuit
5. Cover up or bar-off neighbouring energised parts