Megger TDS40, Руководство по эксплуатации, Страница: 41 / 71

5-41
5.4 Entering / Changing the Administrator Password
By pressing the F2 key “setup” (Fig. 3, item 5) and turning the knob / push-button (Fig. 3,
item 6) the "Password" menu can be accessed. When entering this menu, you have to
enter the administrator password in order to gain the administrator rights enabling you to
adjust the test parameters accessible via the “Parameters” menu (see section 5.3). The
factory-provided default password for any VLF test system is 2345.
The first two digits of the password (23) have to be entered under 1. and the last two digits
(45) have to be entered under 2. Any entered number sequence has to be confirmed by
pressing the knob / push-button (Fig. 3, item 6).
Fig. 24: Setup: Enter password
The access will be gained, if the correct password has been entered. The respective
system message has to be confirmed by pressing the knob / push-button (Fig. 3, item 6).
You are now authorised as an administrator which is indicated by the characteristic
<A> in
the top right of the display.
Fig. 25: Setup: Entered password ok
*Password <A>
43:Access released
Password
*1.: 00
2.: 00
Enter password