Megger TDS40, Руководство по эксплуатации, Страница: 42 / 71

5-42
After the password has been entered and accepted, it can be changed.
In order to change the password, you have to access the “Passw. Set” menu right after
you gained administrator rights. The new password has to be entered the same way as the
current password has been entered (see previous page).
Fig. 26: Setup: Enter new password
Fig. 27: Setup: New password stored
5.5 Returning to the Start Menu
In order to return to the start menu you have to access either the “Return” or the “Escape"
menu item.
If you leave the setup via “Return” (fully to the left),
you lose the administrator rights .
If you leave the setup via “Escape” (fully to the right), you keep the administrator rights.
Fig. 28: Setup: Return to start menu
*Return <A>
Your selection ?
?
*Passw. Set <A>
55:Password stored
Passw. set <A>
*1.: 00
2.: 00
Change password ?