Megger TDS40 Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 71

Megger TDS40 Скачать руководство пользователя страница 51

6-51

From now on, only the test parameters which have been specified as [set on device] under

WinkisVLF can be manually changed. This does also apply for the parameters accessible

via the setup menu (F2 key).
If the card is removed from the slot, the settings are undone and the standard start menu

appears on the display.

A cable test can be started as described in section 4.1.

Attention!

If the SystemCard is removed during an ongoing cable test, the test is

interrupted!

For the

special case

of a SystemCard intended to change the settings of the test system

permanently (see section 6.4.1), the settings (test parameter, print templates etc.) are

handed over and stored in the system right after the card has been identified as a “Proper

Card ?”. Afterwards, the start menu looks as follows and the card has to be removed from

the slot.

Fig. 35:

Start menu after new system settings have been stored

VLF mode

25kV

30min

F1:Print

F2:Setup

Card data stored.

«
...
49
50
51
52
53
...
»

Содержание TDS40








































































Отзывы:

Нет отзывов