3.8.8.1 Reclose Relay Setting Screen
Figure 75 Reclosing Relay Setting Screen
•
The Timing Settings button will change screens and will allow changes to meet the
manufacturer specifications.
•
Relay Tap, Time Dial, Number of Operations, Target Tap, IEEE Curve Type, Reclose
Operations, Reclose Time, and Lockout Time to be set unless factory defaults are used.
•
The number of ‘Reclose Ops’ will be one less than the ‘No. of Operations’. The time setting
for ‘Reclose Time’ will be the same for each operation. The lockout time is the time that a
lockout should occur unless a trip has occurred again.
•
The Timer Setup screen allows the user to define how the time will be used.
The bottom of the screen has common buttons.
File:
This selection will take the user to the File
Manager.
Test Menu:
This selection will return the controller to the
Test Menu Screen.
Main Menu:
This selection will return the controller to the
Main Menu:
-
104
www
. ElectricalPartManuals
. com
