3.8.7.2 Power Relay Pickup Test Results
This screen displays the results upon test completion. No data may be entered in this screen.
Figure 71 Power Relay Pickup Test Setting Screen
In the power Relay Pickup test Screen only the voltage(s) and current(s) selected in the Relay
Setting Screen will be active in the test screen. For example, in the setting screen only 1 voltage
and current were selected, therefore, only V1 and I1 are activated in the above figure. Pressing
the Start button will start the test. The test voltage specified in the setting screen will be applied,
and the appropriate test current will be applied at the appropriate test angle. The current will
automatically ramp up until the relay operates, or in case of a solid-state relay the LED lights up
indicating pickup. The pickup Watts will be displayed in the Watts box. The formula used to
calculate Watts is also displayed.
The bottom of the screen has common buttons.
File:
This selection will take the user to the File
Manager.
Batt Sim Off / Batt Sim On:
This selection will turn the Battery Simulator On
and Off.
Test Menu:
This selection will return the controller to the
Test Menu Screen.
Main Menu:
This selection will return the controller to the
Main Menu:
Start / Stop:
This selection will apply the set quantities
displayed and begin the test. After Start is
pressed this button will turn red and display
Stop. Pressing Stop at any time will stop the
test and turn the outputs off.
-
100
www
. ElectricalPartManuals
. com
