Medivance BD Arctic Sun 6000, Руководство оператора

Страница: 28 / 57

Operator’s Manual
28
THERAPY SETTINGS (Continued)
12. Temperature Units
Use the Temperature Units to select to have either °C or
°F as the default temperature units displayed on the
therapy screen.
NOTE: If both units may be useful, enable the
Temperature Units Adjust feature so that the
temperature units are selectable from the therapy screen.
•
From the Hypothermia Settings screen or the
Normothermia Settings screen, press the button to the
right of the Temperature Units parameter.
•
Use the Up and Down arrows to select the temperature
units setting.
Range: °C; °F
•
Press the Save button to save the new setting and close
the window. Press the Cancel button to close the window
without saving the new settings.
13. Temperature Units Adjust
Use the Temperature Units Adjust to enable or disable
the °C/°F button on the therapy screen. The °C/°F button
allows the user to toggle the displayed patient and water
temperatures between Celsius (°C) and Fahrenheit (°F).
If the Temperature Units Adjust is enabled, the
°C/°F
button is visible and functional. If the Temperature Units
Adjust is disabled, the
°C/°F button is not visible and the
function disabled.
•
From the Normothermia Settings screen or the
Hypothermia Settings screen, press the button to the
right of the Temperature Units Adjust parameter.
•
Use the Up and Down arrows to select the temperature
units setting.
Range: Enable; Disable
•
Press the Save button to save the new setting and close
the window.
•
Press the Cancel button to close the window without
saving the new settings.
14. Patient Temperature 2
Use the Patient Temperature 2 setting to enable or
disable the Patient Temperature 2 display on the therapy
screen. This safety feature allows independent patient
temperature alarms and alarms.
If the Patient Temperature 2 is enabled, the Patient
Temperature 2 reading is displayed. If the Patient
Temperature 2 is disabled, the Patient Temperature 2
reading is not displayed.
•
From the Hypothermia Settings screen or the
Normothermia Settings screen, press the button to the
right of the Patient Temperature 2 setting.
•
Use the Up and Down arrows to select the Patient
Temperature 2 display setting.
Range: Enable; Disable
•
Press the Save button to save the new setting and close
the window.
•
Press the Cancel button to close the window without
saving the new settings.
15. Speaker Volume
Use the Speaker Volume setting to select the level of
audio tones (e.g. Alarms) issued by the unit.
The allowable settings are 1 to 5, with 1 being the lowest
volume, and 5 being the highest volume.
•
The volume of certain critical safety alarms is not affected
by the Speaker Volume setting.
•
From the Hypothermia Settings screen or the
Normothermia Settings screen, press the button to the
right of the Speaker Volume parameter.
•
Use the Up and Down arrows to select the speaker
volume setting.
Range: 1; 2; 3; 4 ; 5
•
Press the Save button to save the new setting and close
the window. The unit will issue an audio tone of the
selected volume level.
•
Press the Cancel button to close the window without
saving the new settings.