Interface Card Installation Instructions
Hardware Installation Guide
Mediatrix 3300 – Analog Gateway
47
10.
Screw the top casing at all 8 locations (torque: 3 inch pounds).
There are three screws located on the top side, three screws located on the bottom side, and one
screw located on each side.
11.
Install the ear mounting brackets and screw them in place (torque: 4 inch pounds).
12.
Make sure there is no sound/rattle coming from the unit when manipulated (loose part).
13.
Apply the card serial number label next to the base unit label.
Figure 21:
Applying the Card Serial Number Label
14.
Reconnect the power and telephony cables.
15.
Upgrade the unit firmware if necessary.
Note:
Special note for the interface card 3301-080 (2FXS/6FXO card): Use Firmware DGW v2.0r8.111 or
higher.
Содержание Mediatrix 3308
