Media5 Mediatrix 3308, Руководство по установке оборудования

Страница: 34 / 66

Chapter 3 - Powering on the Mediatrix 3300 Management Choices
24 Mediatrix 3300 – Analog Gateway
3. Contact the Mediatrix 3300 through the new system management network interface.
4. Disable the Rescue network interface as described in the Software Configuration Guide , Chapter
Interface Parameters , Section Interfaces Configuration .
Factory Reset
The Factory reset reverts the Mediatrix 3300 back to its default factory settings. It deletes the persistent MIB
values of the unit, including:

The firmware pack download configuration files.

The SNMP configuration, including the SNMPv3 passwords and users.

The PPPoE configuration, including the PPP user names and passwords.
The Factory reset creates a new configuration file with the default factory values. It should be performed with
the Mediatrix 3300 connected to a network with access to a DHCP server. If the unit cannot find a DHCP
server, it sends requests indefinitely.

To trigger the Factory Reset:
1. Power the Mediatrix 3300 off.
2. Insert a small, unbent paper clip into the RESET/DEFAULT hole located at the rear of the Mediatrix
3300. While pressing the RESET/DEFAULT button, restart the unit.
Do not depress before the LEDs stop blinking and are steadily ON.
3. Release the paper clip.
The Mediatrix 3300 restarts.
This procedure resets all variables in the MIB modules to their default value.
When the Mediatrix 3300 has finished its provisioning sequence, it is ready to be used with a DHCP-
provided IP address and MIB parameters.
This procedure can also be performed at run-time.
Management Choices
Congratulations for properly installing the Mediatrix 3300. You can now configure the software parameters of
the unit.
The Mediatrix 3300 offers various management options. All these options are described in the Dgw v2.0
Software Configuration Guide .
Note:
The Factory reset alters any persistent configuration data of the Mediatrix 3300.
Table 14: Management Options
Management Choice Features
Web GUI The Mediatrix 3300 web interface allows you to configure the following information:
• Network attributes
• SIP parameters
• VoIP settings
• Management settings such as configuration scripts, restore / backup,
etc.
SNMPv1/2/3 The Mediatrix 3300 SNMP feature allows you to configure all the MIB services.
Command Line
Interface (CLI) The Mediatrix 3300 CLI feature allows you to configure all the MIB services.