Media5 Mediatrix 3308, Руководство по установке оборудования

Страница: 23 / 66

Location and Mounting Requirements Hardware Installation Guide
Mediatrix 3300 – Analog Gateway 13
6. Repeat steps 3 to 5 for the bracket on the other side of the Mediatrix 3300.
Media5 recommends to place the second bracket in the opposite corner to the first bracket for
increased stability.
7. Position the Mediatrix 3300 against the wall (or plywood) with the front and rear panels vertical.
Figure 11: Wall-Mount Installation Example
8. Attach the Mediatrix 3300 to the wall (or plywood) with screws (not provided) to ensure that it is
secure.
9. Proceed to “Hardware Installation” on page 14 .
Free Standing Unit
When installing the Mediatrix 3300 on a desk or table, it should be located at least 20 cm from your monitor,
computer casing or other peripherals, including speakers. Never put books or paper on the Mediatrix 3300.
You must also apply the Bumpon
TM
authoadhesive protective products to the bottom of the Mediatrix 3300.
These will stabilize the Mediatrix 3300 and offer skidding resistance.
Condensation
When bringing the unit into a warm environment from the cold, condensation may result that might be harmful
to the unit. If this occurs, allow the unit to acclimatize for an hour before powering it on.
Cleaning
To clean the Mediatrix 3300, wipe with a soft dry cloth. Do not use volatile liquids such as benzine and thinner
that are harmful to the unit casing.
For resistant markings, wet a cloth with a mild detergent, wring well and then wipe off. Use a dry cloth to dry
the surface.