Appendix D - Interface Card Installation Instructions
Interface Card Installation Instructions
46
Mediatrix 3300 – Analog Gateway
6.
Align the 4x21 pins header connector of the card to the receptacle on the motherboard. Make sure
that the card header is well inserted onto its mating receptacle.
Figure 18:
Bending of Capacitor
7.
Screw the interface card’s plate with the 615-00023-00G screws (torque: 3 inch pounds).
Figure 19:
Screw Interface Card’s Plate
8.
Screw the center of the plate with 615-00039-00G model (torque: 3 inch pounds).
Figure 20:
Screw Center of Plate
9.
Slide-in the top cover all the way to the end. Make sure that the RS-232 connector does not interfere
with its opening on the top cover.
Note:
Special note for the interface card 3301-080 (2FXS/6FXO card): Bend slightly the capacitors on the
motherboard in order to allow adequate installation of the card. Latest Motherboard assemblies have a low
height capacitor model to resolve this known issue.
Содержание Mediatrix 3308
