Medex MEDFUSION 3500 Скачать руководство пользователя страница 24

Страница: 24 / 83

EDEX

Medfusion 3500

Medex Operation Manual

Artwork GD000608 Revision 5

Page 19

Selecting Delivery Mode

Below are the steps for selecting a delivery mode for programming with infusion settings:

After successfully completing its system startup self-tests, the pump displays the S

ELECT

THE

ODE

screen.

•

The delivery modes on this screen were setup by

Custom Configuration

, which was completed by the

person responsible for custom configuration

before the pumps were delivered to your work area.

•

Also, if the pump has been configured with “E-Plates” enabled, the first screen is the S

ELECT THE

IBRARY

NTRY

screen (see User Programmable Libraries).

If the S

ELECT THE

IBRARY

NTRY

screen appears, press the

Main Menu

button to call the S

ELECT THE

ODE

screen.

Press any

Number

button to select the desired delivery mode. If you make a mistake use the

Back

button to

undo it.

If you do not see the mode you need, press the

More

button to display the next page of delivery modes.

At the next menu, either:
a)

Select an option by pressing its

number

, and continue.

Or press the

Beginning

button to return to the beginning screen.

Syringe Manufacturer/Type Setup

Below is an example for syringe manufacturer/type setup for use with the

Medfusion 3500

pump:

Use your standard protocol for preparing your syringe & tubing and filling the syringe.

When delivery mode is chosen, set the syringe information. If more than one manufacturer is configured for
the pump then the S

ELECT

YRINGE

ANUFACTURER

YPE

screen appears.

The syringe manufacturers on this screen were setup in

Custom Configuration

, which was completed by

the person responsible for custom configuration before the pumps were delivered to your work area.

Press any

number

button to select the syringe manufacturer. If you make a mistake use the

Back

button to

undo it.

HAT IF

NLY

YRINGE

ANUFACTURER IS

ETUP

If only one syringe manufacturer has been setup for use by this pump (through custom configuration), then this entire
level, and its screen, is skipped during infusion programming.

Содержание MEDFUSION 3500




















































































Результаты поиска

Содержание MEDFUSION 3500

Отзывы:

Похожие инструкции для MEDFUSION 3500

Бренды по названию

Популярные бренды

Medex MEDFUSION 3500, Руководство по эксплуатации

Результаты поиска

Содержание MEDFUSION 3500

Отзывы:

Похожие инструкции для MEDFUSION 3500

Бренды по названию

Популярные бренды