Mecmesin 432-680, Руководство по установке и эксплуатации

Страница: 35 / 65

Mecmesin Interlocked Machine Guarding
Mecmesin

35
6.4 xt Console Installation
For
xt
systems, the console needs to be fitted to the guarding, instead of the test stand. This
can be completed by following the steps below. Please note Steps 1 and 2 only apply to
single column test stands; twin column test stands come with the Tee-slot nut fitted.
For single column guards, ensure that the guarding assembly has been
mechanically secured to a stable work surface (as detailed in section 7), before
fitting the
xt console. This is to prevent the risk ot toppling or tilting with the
extra weight and work needed to fit the console assembly.
Step 1 – Remove the Top Cap
To prevent the console from being obscured by the guarding’s door, it is recommended that
the
xt
console is fitted to the right-front extrusion, (this is highlighted in the image above).
Remove the top cap from the right-hand extrusion in the direction shown by the red arrow
above.