Mecmesin 432-680, Руководство по установке и эксплуатации

Страница: 52 / 65

Mecmesin

52 Mecmesin Interlocked Machine Guarding
8. Servicing, Maintenance and Repair
Once the guard is installed, it should provide a trusted long-term resource for safe and
reliable testing.
8.1 Servicing
Mecmesin guards contain no user-serviceable parts and are designed to be service free.
Periodic inspection and maintenance such as cleaning and lubrication of hinges with a
machine grade oil are recommended.
8.2 Maintenance & Cleaning
It is advised that periodic inspection of the outside of your guard is performed and your
guard is cleaned to enable clear viewing of the test stand and to prevent the build-up of
debris or dust.
To clean the guard first remove any loose debris with a soft brush, then wipe down the
surfaces of the guarding using a damp cloth. A dry cloth may be used to dry surfaces and
remove any watermarks.
Ensure that the mains power supply is disconnected from the test stand before
cleaning any part of the guarding.
When cleaning, care must be taken to avoid corrosive liquids and abrasive tools.
The polycarbonate glass sheets can scratch or discolour with certain cleaning
products. Avoid the use of organic solvents or any other cleaning fluid.
8.3 Repair
If the guard fails or appears to behave unusually, contact your local supplier for
support. Do not continue to use the test stand until the guarding has been
inspected and, if necessary, repaired by Mecmesin or a Mecmesin authorised
distributor.
Do not attempt any repairs without consulting Mecmesin or an authorised
distributor, doing so may lead to injury, damage of equipment and loss of
warranty.