Mecmesin 432-680, Руководство по установке и эксплуатации

Страница: 40 / 65

Mecmesin

40 Mecmesin Interlocked Machine Guarding
6.5 Single Column Override Plug
Single column test stands below 5 kN use an override plug, instead of a key switch, to
override the interlock circuit. The override plug is shown in the image above.
To override the guard and allow the use of the test stand without the guard’s interlock
function active, fit the override plug to the interlock socket located on the test stand’s rear
connectors panel, as highlighted in the image above.
To activate the interlock guard, remove the override plug, ensuring it is stored in a safe
location, and connect the guard’s loom to the interlock socket located on test stand’s rear
connectors panel.