Mecmesin 432-680, Руководство по установке и эксплуатации

Страница: 24 / 65

Mecmesin

24 Mecmesin Interlocked Machine Guarding
6.3 OmniTest Single Column – Installation Guide
Step 1 – Unpacking the Guard
Unpack the guard assembly and safely lift it on to a stable work surface that is suitable to fix
the system to. While ensuring that the lower plate can be easily accessed. Unlock the guard
door using the key supplied.
Step 2 – Disconnecting the OmniTest System
Ensure that all connections, including the mains power lead, are disconnected from the
OmniTest’s rear panel.
Step 3 – Disassembling the Guard
The guard can be fitted by either lowering it over the test stand or sliding it in from the rear
(used if ceiling height prevents the first method).
If the guard is to be lowered on to the test stand continue to
Step 3
. If the guard is to be slid in
from the rear of the test stand proceed to Section 6.3.1. – Rear Slid Assemble.
Locate the four right-angled brackets that connect the guard to the lower base plate, these are
circled in the image above.