Mecmesin 432-680, Руководство по установке и эксплуатации

Страница: 44 / 65

Mecmesin

44 Mecmesin Interlocked Machine Guarding
Switch Position Guard Door Status Stand Operation Software Error Message
0 DOOR CLOSED JOG UP or DOWN NONE
0 OPEN GUARD DOOR JOG UP or DOWN NONE
0 OPEN GUARD DOOR RUN TEST NONE
1 DOOR CLOSED JOG UP or DOWN NONE
1 OPEN GUARD DOOR JOG UP or DOWN INTERLOCK OPENED
1 OPEN GUARD DOOR RUN TEST INTERLOCK OPENED
6.9 MultiTest- i Interlock Function Test
The following section only applies to MultiTest-
i
test stands.
Work through the table below row-by-row setting the interlock key switch as per the first
column and the guard door position as per the second column.
Next, invoke the stand operation stated in the third column, this will involve either jogging
the test stand in Emperor or attempting to run a test. Check any error message in Emperor
against the ‘Error Message’ column in the table::
Please refer to
Section 7.3.1
for more information relating to Emperor warning messages.
Should any of the above checks fail to indicate the correct test stand state or
operation, then consult your test stand’s relevant user manuals. Seek assistance
from a local agent or Mecmesin Technical Support if the fault cannot be
rectified.
Failure to adhere to these checks could cause damage to both the end user and
test equipment. It may also affect the warranty terms.