Mecmesin 432-680, Руководство по установке и эксплуатации

Страница: 47 / 65

Mecmesin Interlocked Machine Guarding
Mecmesin

47
7.2.1 VectorPro™ - Warning Message
If the interlocked guard door is opened during a test (and the interlock system is active) the
warning message shown below will be displayed:
At this point, the test will be aborted, and the machine drive will be inhibited. Closing the
guard door will remove the machine display panel error, but the test sample being
recorded in VectorPro cannot be continued. The test is automatically aborted.
7.2.2 VectorPro™ - Pause Operation
When using VectorPro in conjunction with an interlocked machine guard, certain
operations allow for the guard warnings to be overwritten. These timeline operations are in
the ‘Pause’ section of VectorPro and they allow the door to be opened without aborting a
test.
When a ‘Pause’ operation in the test timeline is reached, the test stand will stop and the
window shown below is displayed onscreen. This indicates which button to press on the
front panel to continue the test.
While the test is paused, the guard door may be opened and closed. Once ‘Play’ is pressed,
the test will continue. If the door is left open when pressing ‘Play’, the test will immediately
abort. Opening the guard door without a software ‘Pause’ active will also operate the
interlock circuit in the usual manner.
During a ‘Pause’ operation, the following message
will be displayed on the test stand’s front panel
when opening the guard; ‘ Interlock Active ! ’. This is
shown in the image to the right.
For more information relating to ‘Pause’ operations,
please refer to your VectorPro user manual.