STACKING KIT INSTALLATION INSTRUCTIONS
(MAH6700 washer & MDE6700 dryer only)
Step 3:
Unscrew and disassemble the four leg
assemblies.
Step 4:
Disassemble each leg from the bracket. Then flip
the bracket over and remount onto the leg.
Step 1:
Place cover (cloth, cardboard, or carpeting) on floor surface
to avoid damage.
Step 2:
Lay the dryer on its side (not front or back).
DC68-01052D REV(0.1)
Caution
: Two people are required to lift the dryer on to the washer.
WARNING :
This kit is not to be used for stacking a gas
dryer. Additional gas hook-up components are required.
Step 6:
Snap the Stacking Support Guides into the rectangular holes
in the dryer base and secure each with two(2) Screws Phillips-pan
head (6006-001174).
Hook
Step 7:
Bottom view of the dryer after assembling the Stacking
Support Guides to the dryer base.
Dryer
Step 5:
Reassemble each leg and bracket into the dryer base.
