mecalac AF 1050, Руководство по эксплуатации

Страница: 78 / 148

F1050/F1200 8-10
8 Maintenance
2
1
Figure 8-18
Figure 8-20
Figure 8-19
8.2.7 Oil change, axles
8.2.7.1 Rear axle
(1) Place a sufficiently large oil drain pan underneath.
(2) Unscrew the plugs from the axle arch (8-18/2 and
8-19/2) and drain the oil.
CAUTION
Waste oil must be disposed of in such a way
that it will not cause pollution!
(3) Screw in the plug (8-19/arrow) again.
(4) Fill in oil via the plug bore (8-18/2) until the oil level
reaches the opening.
N O T E
- Information about the quantity of oil is given in
the maintenance plan (chapter 8.4).
- After a few minutes, when the oil level has
lowered, top up the oil until the oil reaches the
marked level and remains stable.
- The vent valve of the axle (8-18/1) must be
free from dirt.
(5) Screw in the plug (8-18/2) again.
8.2.7.2 Planetary gear
(1) Move the loader so that the plug (8-20/arrow) is
positioned at 6 o’clock.
(2) Place an oil drain vessel with a drain channel under-
neath the gear.
(3) Unscrew the drain plug and let the oil drain out.
CAUTION
Waste oil must be disposed of in such a way
that it will not cause pollution!