mecalac AF 1050, Руководство по эксплуатации

Страница: 77 / 148

F1050/F1200 8-9
Maintenance 8
1
8.2.6 Changing the engine oil filter insert
(1) Clean the filter body and its environment (8-17/1).
(2) Place a sufficiently large oil drain pan underneath.
(3) Loosen the filter cartridge (8-17/arrow) with a spanner
(74 mm) or with a strap filter wrench and unscrew it with
your hand. Make sure the seal is not stuck in place.
CAUTION
Caution: risk of burns as long as the engine oil
is hot.
(4) Clean the sealing seat of the new cartridge.
(5) Lubricate the seal of the new engine oil filter cartridge
with clean engine oil.
(6) Screw the new filter cartridge in place and give it half
a turn to tighten it (heed the manufacturer’s notes).
CAUTION
Take care not to tighten the filter too much to
prevent deformation of the thread and damage
to the seal!
(7) Idle the engine briefly to fill the filter with engine oil.
CAUTION
Check the engine oil pressure: After the engine
has started, the indicator for engine oil pressure
must go dark within 15 seconds. When the
indicator remains lit, shut off the engine
immediately!
(8) Check the engine oil level as described in section
8.2.1.1 and top up if necessary.
Figure 8-17