mecalac AF 1050, Руководство по эксплуатации

Страница: 134 / 148

F1050/F1200 13-2
13 Optional Extras
2 1
13 Additional options, modifica-
tions, notes on inspection for loaders
13.1 Additional options
13.1.1 Hand throttle
(option)
The loader is equipped with a hand throttle (13-1/2) for
operations requiring a constant travel speed over a longer
period of time.
The hand lever connects to the accelerator with a Bowden
cable.
NOTE
- Pushing the hand throttle to the front increases
the travel speed up to the maximum speed of
the selected gear stage.
- To decrease the travel speed, pull the hand
throttle to the rear until the loader stops.
- Pull the hand throttle all the way to the rear
to the “ZERO” position after completion of
work.
13.1.2 Inching speed
(option)
Generally, all work is carried out in gear stage “II”.
In special situations requiring a high engine speed at low
travel speed (such as rotary brush, trench cutting machine,
etc.), you may have to select gear stage “I” and inching
speed.
(1) Start the engine.
(2) Pick up the attachment and move it to the required
start position.
(3) Pull the inching speed control (13-1/1) all the way to
the rear.
(4) Select gear stage “I” (4-11/1).
(5) Set the drive switch “forward/0/reverse” (4-11/4) to
the desired travel direction.
(6) Fully depress the accelerator pedal (4-9/6).
(7) Push the inching speed control forward slowly until
the desired speed has been reached.
NOTE
- With gear stage “I” selected, you can
continuously adjust the travel speed from 0
to 5 km/h using the inching speed control.
The farther you pull the inching speed control
to the rear, the lower is the travel speed and
can even be “zero”.
- Push the inching speed control all the way to
the front to the maximum speed setting after
completion of work.
Figure 13-1