mecalac AF 1050, Руководство по эксплуатации

Страница: 15 / 148

F1050/F1200 1-7
Safety regulations 1
Figure 1-1
Figure 1-2
1.5.2 Special work regarding the use of the
machine and elimination of defects during
work; disposal
1.5.2.1 The dates for adjustment work, maintenance
work and inspections laid down in the operating manual
(machine and engine) must be strictly observed. This also
applies to information regarding the replacement of parts/
part equipment. This work may only be executed by skilled
personnel.
1.5.2.2 For all work involving the operation, conversion or
adjustment of the machine and its safety devices as well
as inspection, maintenance and repair work, please observe
the switch-on and switch-off procedures in accordance
with the operating manual (machine and engine) as well as
the related instructions for maintenance work.
1.5.2.3 The engine must be switched off before mainte-
nance or repair work is carried out.
1.5.2.4 The stability of the machine or the attachments
must be guaranteed at all times during maintenance and
repair work.
1.5.2.5 Maintenance and repair work may only be carried
out when the attachment is set down on the ground or
supported or when equivalent measures against uninten-
tional movement were taken.
During maintenance and repair work under the bucket arm:
- the bucket arm must be mechanically supported,
e.g. insert the bucket arm support (option) (1-1/arrow)
- secure the hand lever for the working and auxiliary
hydraulics (actuate toggle switch 1-2/arrow „top“ ).
1.5.2.6 If necessary, secure the maintenance area on a
large scale.
1.5.2.7 The machine must be protected from un-
intentionally starting after it has been switched off for
maintenance and repair work:
- remove the ignition key and
- attach a warning sign to the main battery switch.
This applies especially to works on the electrical equip-
ment.
1.5.2.8 Individual pieces and large assemblies must be
carefully secured to hoisting equipment when being re-
placed to avoid any damage. Only suitable and technically
sound hoisting equipment may be used as well as crane
equipment with adequate payload. Do not stand or work
underneath suspended loads!
1.5.2.9 Only experienced personnel should be entrusted
with the securing of loads! Loads must be secured so that
they cannot slip or fall down.
1.5.2.10 Attached loads may only be moved with the
machine when the road is graded.