mecalac AF 1050, Руководство по эксплуатации

Страница: 51 / 148

F1050/F1200 5-9
Operation 5
(4) Arm rests:
If desired, you can swing the armrests to the rear and
adjust their height.
To adjust the armrest height, remove the round cap (5-12/
arrow) in the covering.
Loosen the hex nut (wrench size 13 mm), set the armrest
as desired and tighten the nut again. Push the removed cap
onto the nut again.
(5) Adjusting the backrest:
Use the locking lever (5-13/arrow) to adjust the backrest.
N O T E
The locking lever must engage in the desired
position. It must be impossible to move the
backrest to another position when the lever has
engaged.
(6) Longitudinal adjustment:
You can adjust the seat in longitudinal direction when you
pull the lever (5-14) upwards.
N O T E
The locking lever must engage in the desired
position. It must be impossible to move the
backrest to another position when the lever has
engaged.
Figure 5-12
Figure 5-14
Figure 5-13