mecalac AF 1050, Руководство по эксплуатации

Страница: 76 / 148

F1050/F1200 8-8
8 Maintenance
Figure 8-16
(4) Screw the drainage nozzle with hose from the tool box
(4-1/12) to the oil drain valve.
(5) Remove the cover cap from the hose.
(6) Let the entire oil flow out.
CAUTION
Caution: risk of burns as long as the engine oil
is hot.
(7) Close the drain hose with the cover cap and unscrew
the hose.
NOTE
Screw the oil drain plug in again if there is no
safety oil drain valve.
CAUTION
check the waste oil. Black, low viscosity oil
indicates thinning with fuel. Milky oil indicates
blending with coolant.
Heed the stipulated oil change intervals in order
to maintain the oil quality.
CAUTION
Waste oil must be disposed of in such a way that
it will not cause pollution!
(8) Screw the cap onto the oil drain plug.
(9) Fill engine oil into the engine via the filler neck (8-16/
arrow). The filling level must reach the upper marking “
H “.
NOTE
Information about the quantity and designation
of oil as well as the change intervals is given in
the maintenance plan (chapter 8.4).
(10) Close the filler neck (8-16/arrow) and start the engine.
(11) Idle the engine briefly and check for leaks at the screw
plug etc.
(12) Check the engine oil level (section 8.2.1.1) and top up
if applicable.