mecalac AF 1050, Руководство по эксплуатации

Страница: 48 / 148

F1050/F1200 5-6
5 Operation
1 2
Figure 5-7
NOTE
- To attain full performance, the combined action
of propulsion and of the working hydraulics is
necessary. It is up to the operator to control the
available power using the accelerator, the inching
function and the hand lever for the working
hydraulics.
- The travel speed and the thrust force are altered
exclusively by depressing the accelerator pedal.
- When driving up gradients, the travel speed
decreases in spite of full throttle in favour of the
thrust force.
CAUTION
- The hydraulic quick-change device must only
be actuated if an attachment has been mounted.
- If the hydraulic oil temperature indicator lamp
(4-14/13) lights up during operation, the loader
must be switched off immediately, the cause
must be determined by a hydraulics expert and
the malfunction must be eliminated.
5.2.5 Heater and ventilation system
5.2.5.1 Setting the air flow
(1) Turn the rotary switch (5-6/1) for the blower to position
0, 1, 2, or 3 depending on the air flow desired.
(2) Adjust the direction of the air flow by means of the
lateral nozzles (5-7/arrows and 5-8/arrows).
5.2.5.2 Switching on the heater
(1) Depending on the heat required, turn the rotary switch
(5-6/2) to the desired position.
N O T E
Rotary switch turned in clockwise direction
- warm.
Rotary switch turned in counter clockwise direction
- cold.
(2) Adjust the amount of air as described under 5.2.5.1.
Figure 5-6
Figure 5-8