Technical Manual RF Socket RF-AxK1ST.01
MDT technologies GmbH
•
51766 Engelskirchen
•
Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• [email protected] • www.mdt.de
19
4.2.3 Logical functions
The following illustration shows the setting options at the ETS-Software:
Figure 7: Logical functions
The logic function can be activated with one or two objects. The objects are the inputs of the logic
block. Furthermore you can choose between an AND-function and an OR-function. The following
figure shows an overview of the basic logic function with two objects:
Figure 8: Overview Logic function
The logic function consists of the activated input objects and the switching object for each channel.
The output of the logic is the respective relay output of the channel, so the physical switching of the
channel.
The following chart shows the relevant communication objects:
Number
Name
Length
Usage
6
Logic 1
1 Bit
Logic object 1, is the first input for the logic
block
7
Logic 2
1 Bit
Logic object 2, is the second input for the logic
block
Table 10: Communication objects logic
