Technical Manual RF Socket RF-AxK1ST.01
MDT technologies GmbH
•
51766 Engelskirchen
•
Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• [email protected] • www.mdt.de
15
The blocking function gets active, when the corresponding communication object becomes a logical
. By se di g a logi al
, the lo ki g fu tio a e dea ti ated agai .
The para eter Beha ior he lo ked defi es a a tio for the output at a ti ati g t
he blocking
process. There are the setting on, off and no change available. The same settings are also available
for the Beha ior he u lo ked . This a tio is alled he the lo ki g fu tio is dea ti ated
again.
The following chart shows the corresponding communication object:
Number
Name
Length
Usage
3
Block
1 Bit
blocks the channel
Table 8: Communication object blocking function
The follo i g diagra des ri es the lo ki g pro ess. For the Beha ior he lo ked , the a tio
n on
as para eterized a d for the Beha ior he u lo ked the a tio off as para eterized:
The KNX telegra sho s hi h alues are se d to the lo ki g o je t. By se di g a logi al
, the
blocking function is activated and the channel is switched on. The blocking function is deactivated
agai y se di g a logi al
. “o the ha el is s it hed off.
