MDT Technologies RF-AKK1ST.01, Техническое руководство

Страница: 12 / 42

Technical Manual RF Socket RF-AxK1ST.01
MDT technologies GmbH
•
51766 Engelskirchen
•
Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• knx@mdt.de • www.mdt.de
12
3.2 Default settings of the communication objects
The following chart shows the default settings of the communication objects:
Default settings
Nr. Name Object Function Length Priority C R W T U
Switch channel:
0 Channel A Switch on/off 1 Bit Niedrig X X
1 Channel A Staircase 1 Bit Niedrig X X
3 Channel A Block 1 Bit Niedrig X X
4 Channel A Scene 1 Byte Niedrig X X
5 Channel A Status 1 Bit Niedrig X X X
6 Channel A Logic 1 1 Bit Niedrig X X
7 Channel A Logic 2 1 Bit Niedrig X X
Active power meter:
8 Active power
meter Active power 2 Byte/
4 Byte Niedrig X X X
9 Active power
meter Current value 2 Byte/
4 Byte Niedrig X X X
10 Active power
meter Voltage value 4 Byte Niedrig X X X
11 Sub Meter Active Energy 4 Byte Niedrig X X X
12 Main Meter Active Energy 4 Byte Niedrig X X X
13 Active power
meter Exceedance of load 1 Bit Niedrig X X X
14 Active power
meter Lower deviation of load 1 Bit Niedrig X X X
15 Active power
meter Exceedance of current 1 Bit Niedrig X X X
16 Active power
meter Lower deviation of
current 1 Bit Niedrig X X X
17 Active power
meter Exceedance of voltage 1 Bit Niedrig X X X
18 Active power
meter Lower deviation of
voltage 1 Bit Niedrig X X X
19 Sub Meter Reset 1 Bit Niedrig X X
20 Main Meter Reset 1 Bit Niedrig X X
Table 3: Communication objects
–
default settings
You can see the default values for the communication objects from the upper chart. According to
requirements the priority of the particular communication objects as well as the flags can be
adjusted by the user. The flags allocates the function of the objects in the programming thereby
stands C for communication, R for Read, W for write, T for transmit and U for update.