MDT Technologies RF-AKK1ST.01, Техническое руководство

Страница: 4 / 42

Technical Manual RF Socket RF-AxK1ST.01
MDT technologies GmbH
•
51766 Engelskirchen
•
Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• knx@mdt.de • www.mdt.de
4
2 Overview
2.1 Overview devices
The manual refers to the following devices:

RF-AKK1ST.01 KNX RF+ Socket
o
flush-mounted, nominal voltage: 230V AC, maximum load: 10A, Switching- and
Staircase-function, Communication by new KNX RF+ protocol in system mode

RF-AZK1ST.01 KNX RF+ Socket with active power measurement
o
flush-mounted, nominal voltage: 230V AC, maximum load: 10A, Switching- and
Staircase-function, Power, Current and Voltage measurement with power monitoring,
Metering, Communication by new KNX RF+ protocol in system mode
2.2 Verwendung & Einsatzgebiete
The MDT RF socket can switch almost all electrical devices. The outputs can operate as normal
switching outputs or as output with staircase function. In both settings extensive options are
available.
The RF socket with active power measurement contains of an integrated true RMS measurement. By
measuring current and voltage, the power consumption of a device can be measured precisely.
Furthermore, measured values for voltage and current can be sent and in accordance to the values,
actions can be triggered.
The devices communicate via the KNX RF+ protocol. By using the RF socket, normal sockets can be
controlled via the KNX system.
The device communicates via the KNX RF+ protocol. Detailed information for planning and working
with radio lines via the KNX RF+ protocol can be downloaded at
http://www.mdt.de/EN_Downloads_Manuals.html
.