MDT Technologies JAL-01UP.02 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 84

background image

Technical Manual Shutter Actuator JAL-0X10X.02

MDT technologies GmbH •

51766 Engelskirchen • Papiermühle

1

Tel.: +49-2263-

880 • Fax: +49

-2263-4588

• [email protected] • www.mdt.de

5

5

Advanced Block function

Additionally to the normal alarm-/blocking functions, an alarm position can be approached.
The behavior after an alarm can be set independently for each alarm/block.
The actuator has, additionally to the normal blocking function significantly enhanced blocking
functions. Here you can extensively block absolute positions, clouding or air functions as well as
scenes or central functions.
For example, a function "Children Sleep" can be easily realizeded: Manual operation disables the
absolute position and central functions.
Durch Anfahren der oberen Position wird die Beschattung und Zentralfunktion wieder freigegeben.
Alternativ kann auch die Sperrfunktion mit einer 0 zurückgesetzt werden.
By moving to the upper position, the clouding and the central function can be enabled again.

Alter ati ely, the lo ki g fu tio a e reset ith a

.

Advanced Scene function

The advanced scene function can not only approach positions, but also activate and remove any
blocking.
At blinds it is possible just to change the slat position.

Advanced Automatic function

There are two automatic blocks, each with 4 positions which are activated with 1 bit telegrams. Each
channel can be assigned to one block and 1-4 positions.
In every channel, the positions 1-4 to be approached can be parameterised at will, as well as the
action at withdrawal of each automatic position.

Extensive status information for visualization

The actuator can output comprehensive status information, such as e.g. "upper position," "lower
position"move up","move down", as well as the current/last direction .

Plaintext diagnosis with 14-byte object

For automatic clouding there is a 14-byte diagnostic object which reports the current state of the
clouding like "enabled/disabled", the active brightness threshold as well as the calculated position of
the sun, i.e. azimuth and elevation
Each channel also has a diagnosic object, which reports the last state of the channel. Here you can
see if the channel is in a state of alarm, an air position, or is locked.
The diagnosis objects save time when reviewing and troubleshooting and simplify commissioning

Long Frame Support

Support to send longer messages and thus, the accommodation of more user data per telegram.
Thereby the programming time is significantly shortened (from the ETS5).
Requires use of a programming interface which supports the transmission of long frames, for
example MDT SCN-USBR.01 or SCN-IP000.02/SCN-IP100.02

«
...
3
4
5
6
7
...
»

Содержание JAL-01UP.02





















































































Отзывы:

Нет отзывов

Похожие инструкции для JAL-01UP.02

Бренд: Hansen Страницы: 4

Бренд: Danfoss Страницы: 2

Бренд: Danfoss Страницы: 2

Бренд: Danfoss Страницы: 12

Бренд: Danfoss Страницы: 24

Бренд: Danfoss Страницы: 60

Бренд: Danfoss Страницы: 10

Бренд: Danfoss Страницы: 20

Бренд: ZKTeco Страницы: 2

Бренд: FASAR ELETTRONICA Страницы: 2

Бренд: Faro Barcelona Страницы: 8

Бренд: Faro Страницы: 3

Бренд: YASKAWA Страницы: 456

Бренд: Van Air Страницы: 4

Бренд: Harmonic Drive Страницы: 85

Бренд: LAE electronic Страницы: 7

Бренд: LAE electronic Страницы: 2

Бренд: Rain Bird Страницы: 138

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды