MDT Technologies JAL-01UP.02 Скачать руководство пользователя страница 81

Страница: 81 / 84

Technical Manual Shutter Actuator JAL-0X10X.02

MDT technologies GmbH •

51766 Engelskirchen • Papiermühle 1

Tel.: +49-2263-

880 • Fax: +49

-2263-4588

• [email protected] • www.mdt.de

6.4 Examples

6.4.1 Parameter takeover of different channels

If several channels should be set as groups, for example Channel B = Channel E, then the following
procedure is recommended:

Activate respective channels in menu "Channel Selection"

Select channel B, press and hold button

„Strg

and now click on channel E. Both channels are

marked:

Make settings in the displayed parameters => settings are applied to both channels.

Shall also submenus, such as alarms and locking functions get same parameters, then first

ope the ha el B su e u alar s a d lo ki g fu tio s, press a d hold the Strg key a d

now click to channel E: alarms and locking functions. Now, the same settings can be made
here.

Consequently, the same communication objects are displayed for both channels.

Note: Only these parameters or settings are "copied" which have been made during the
simultaneous activation of the channels. Further adjustments can be made in each channel
individually.

Содержание JAL-01UP.02





















































































Результаты поиска

Содержание JAL-01UP.02

Отзывы:

MDT Technologies JAL-01UP.02, Техническое руководство, Страница: 81 / 84

Результаты поиска

Содержание JAL-01UP.02

Отзывы: