Technical Manual Shutter Actuator JAL-0X10X.02
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• [email protected] • www.mdt.de
48
48
4.9 Automatic function
An automatic function can be activated for each channel. Via the automatic function, up to 4
different states can be called up for each channel. The automatic function is divided into 2 blocks (A
and B). The automatic function also makes it possible to carry out several actions simultaneously, e.g.
via one command to move to a shutter position as well as to a blind position and, in addition, to
adjust the slats of the blind.
The following figure shows the activation of the automatic function for a channel:
Figure 14: Automatic function
If the automatic function for a channel is activated, a new sub-point (channel X: automatic) appears
in the left selection menu for the automatic function, in which the further settings can be made.
The automatic function can still be executed even when the window is open or tilted.
4.9.1 Submenu automatic function
The following figure shows the possible settings for the automatic function in sub-menu Channel X:
Automatic:
Figure 15: Submenu automatic function