MDS 05-3627A01, Rev. D
LEDR Series I/O Guide
87
User permission (
perm
) may be set to: read (
r
), write (
w
), network (
n
) or
administrator (
a
). The privileges granted by each level are as follows:
•
Read (
r
) is the lowest level of user access and allows radio informa-
tion to be viewed only. Changes to radio settings are not allowed.
•
Write (
w
) allows most, but not all radio settings to be changed.
•
Network (
n
) allows everything permitted by lower levels, and also
allows changes to the radio’s IP configuration.
•
Administrator (
a
) allows everything permitted in lower levels, and
also allows changes to be made to user accounts (add, delete, mod-
ify). It is normally used by a System Administrator or other person
responsible for the radio system.
Example entry:
user add fieldserv secret w
The above example shows the command string for adding a new user
(fieldserv), with “write” permission and a password of
secret
.
Example Response:
user: Command Complete
NOTE:
If you are logging in for the first time since the radio was
shipped from the factory, refer to
information.
ver
Version of Firmware/Hardware
Usage:
ver [frw|hdw|ext]
This command displays radio version information for firmware (
frw
),
hardware (
hdw
) and Extended Version Information (
ext
).
Example 1:
LEDR> ver frw
Response 1:
ver: LEDR Part #06-3451A01
ver: 2.4.3
(Version of firmware P/N above)
Example 2:
LEDR> ver hdw
Response 2:
ver: {Hardware version}: A
Example 3:
LEDR> ver ext
Response 3:
ver: Part #06-3451A01
ver: 2.4.3
ver:
ver: Image 1
ver: Region Expected Upgrade
ver: Firmware 2.4.3
ver: DSP 1.1.0
ver: FPGA Ver1.22
