manualshive.com logo in svg

MDS LEDR 1400F, Руководство по установке и эксплуатации

Поделиться
Скачать
MDS LEDR 1400F Скачать руководство пользователя страница 94

86

LEDR Series I/O Guide

MDS 05-3627A01, Rev. D

This command is used to display continuously updated readings of: 
RSSI, radio temperature, RF output, signal-to-noise ratio, and FEC 
errors (corrected and uncorrectable). The display can be stopped by 
pressing Control-C on the terminal. 

If the 

trend

 command is used by itself or with 

all

 (

trend all

), all associated 

parameters will be reported. More than one argument can be used to dis-
play several selected items in the desired order.

NOTE:

This command is not available from a Telnet session.

txkey

Radio Transmitter Keying Status

Usage:

 txkey [on|off]

This command sets or displays the radio transmitter status. ON indicates 
the radio transmitter is keyed and transmitting. 

OFF

 indicates the trans-

mitter is not keyed. 

unitid

Unit Identification Number for Orderwire and NMS

Usage:

 unitid [<ID>]

This command sets or displays the radio’s unit identification number. 
This number is used for Orderwire signaling and by the NMS (Network 
Management System). (See “USING ORDERWIRE” on Page 99.) The 
factory default is the last three numbers of the unit serial number. 
(1-999)

uptime

Up Time

Usage:

 uptime 

This command displays how long the radio has been powered-on.

user

User Account Information

Usage:

 user [subcommand] [<argument>]

Subcommands: 

add <user> <pass> <perm>
del <user>
perm <user> <perm>
pass

This command provides administrator access for setting new user 
accounts and permission levels. 

NOTE:

The password (

pass

) and user names are case sensitive and

may not exceed eight characters. Two quotation mark charac-
ters ("") may be used as a “blank” password. If quotation
marks are used, the shift key or cap lock keys must be
depressed.

Содержание LEDR 1400F



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды