manualshive.com logo in svg

MDS LEDR 1400F, Руководство по установке и эксплуатации

Поделиться
Скачать
MDS LEDR 1400F Скачать руководство пользователя страница 82

74

LEDR Series I/O Guide

MDS 05-3627A01, Rev. D

rdnt

Redundant (Protected Operation)

The 

rdnt

 command is used to manage protected operation of the LEDR 

radio and display operating status.

Usage: 

rdnt [subcommand] [arguments]

Subcommands:

active
default
hitless
ip
mode
nsd
status
swxcvr
temp
mode

The following subcommands are divided into two groups: read only and 
read and set.

Read Only:

active

—Shows whether the currently selected transmitter is active or 

inactive.

default

—Displays whether the radio is the default radio in a protected 

configuration. 

status—

Protected status of this radio and the sibling radio.

Read & Set:

hitless

—Sets or displays the hitless (error-free) switching status of the 

receivers. It can be enabled or disabled using the 

hitless on|off

 command. 

In protected operation, either receiver (regardless of which transmitter 
is active) can provide data to the user data port(s) in hitless mode. In 
non-hitless mode, only the receiver in the active radio provides received 
data. Radios operated in a space-diversity configuration must be config-
ured to use hitless switching.

ip

—Used to set or display the IP address to be kept in the memory of this 

unit of the associated (sibling) radio in a redundant pair of transceivers. 
In other words, the 

rdnt ip

 setting of the top radio in a protected pair must 

be set to the bottom radio’s IP address for proper switching and net-
work-management functionality.

Содержание LEDR 1400F



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды