McDATA Sphereon 4500 Скачать руководство пользователя страница 182

Страница: 182 / 216

A-22

McDATA® Sphereon™ 4500 Fabric Switch Product Manager User Manual

Product Manager Messages

Message

Resource is unavailable.

Description

The specified operation cannot be performed because the product is
unavailable.

Action

Verify that the EFC Server-to-product link is up. If the link is up, the
EFC Server may be busy. Try the operation again later.

Message

Send firmware failed.

Description

Send firmware operation has failed.

Action

Retry the operation. If the condition persists, contact support
personnel.

Message

SNMP trap address not defined.

Description

An SNMP trap address must be defined if a community name is
defined.

Action

Define an SNMP address.

Message

Stop diagnostics failed. The test is already running.

Description

Diagnostics for the port was not running and the Stop was selected on
the Port Diagnostics dialog box. Diagnostics quit for the port for some
reason, but the Stop button remains enabled.

Action

Verify port operation. Retry diagnostics for port and select Stop from
the dialog box. If problem persists, contact your service
representative.

Message

Stop diagnostics failed. The test was not running.

Description

The action to stop diagnostics failed because the test was not running.

Action

Informational message.

Содержание Sphereon 4500

























































































































































































































Результаты поиска

Содержание Sphereon 4500

Отзывы:

Похожие инструкции для Sphereon 4500

Бренды по названию

Популярные бренды

McDATA Sphereon 4500, Руководство пользователя

Результаты поиска

Содержание Sphereon 4500

Отзывы:

Похожие инструкции для Sphereon 4500

Бренды по названию

Популярные бренды