MBW 1741219-174999, Руководство по безопасности и обслуживанию оператора

Страница: 35 / 47

35
Reducer
If necessary
.
In case of non-
resolvable
breakages or
faults requiring
the replacement
of the
component,
REFER TO A
SPECIALIZED
WORKER
(AUTHORIZED
DEALER).
The gear unit housing is
sealed to the assembly; if you
notice oil leaks, carefully
observe where they come from
because there may be leaks
from other sources.
If the leaks come from the gear
box, contact our technical
service
or a qualified
contractor.
The gearbox is lubricated for
life. The oil should not be
topped off.
For a possible change of the
lubricant due to leaks, use
SYNTHETIC OIL FOR LONG
LIFE REDUCERS ISO VG320
GRADING
.
!
WARNING
IT IS FORBIDDEN TO
REPLACE THE GEAR-
BOX. REFER TO THE
MANUFACTURER OR
THE RETAILER (SPE-
CIALIZED
MAINTE-
NANCE TECHNICIAN).
Machine
stopped/
cut energy
Check of blades
wear status and
replacement if
necessary
Daily Follow the procedures in
para 6.2.1 for replacement
Machine
stopped/
cut energy
Recording of
blades
inclination grade
It is advisable
to periodically
record the
degree of
inclination of
the blades
On the bench, turn the
adjusting screw and adjust the
angle of the blades. The
operation
can
be
carried out
with
the
machine
mounted
with
long
wrenches.
Machine
stopped/
cut energy
Unlocking arms
of blades and
pressure plate
If necessary
Follow the procedures in
para 6.2.2
Machine
stopped/
cut energy
Check gasoline
level and supply
Each start
Check the level
of fuel in the
tank, (whose
capacity is
!
ATTENTION
It is recommended to
make sure that there
is no water in the
gasoline and not to
use gasoline mixture
Machine
stopped/
cut energy