MBW 1741219-174999, Руководство по безопасности и обслуживанию оператора

Страница: 13 / 47

13
2.1 IDENTIFICATION DATA OF THE
MACHINE
In order to ensure proper identification of the
machine, please refer to the serial number
stamped on the invoice and the data imprinted
on the manufacturer's plate bearing the CE
marking symbol attesting to its conformity to
the applicable directives.
The plate has the following required content:
•
Manufacturer’s name & address (1)
•
CE marking (2)
•
Build year (3)
•
Type designation (4)
•
Serial number (5)
•
Engine serial number (6)
•
Power of the engine (7)
•
Mass in kg (8)
2.2 INTENDED USE
The trowel machine "Moskito" is meant to
perform finishing of edges of concrete floor,
resin flooring and/or substrates. To make this
process the machine is equipped with a 4 or 6
blades rotor depending on the version,
powered by an internal combustion engine.
The fuel used is unleaded petrol, which comes
from the tank to the carburettor after being
filtered. Only one operator is required to
operate the machine.
He should be able to move freely and
unhindered.
This version of trowel machine (equipped
with internal combustion engines) can be
used exclusively outdoors and finishing
work flush with the wall.
The machine may only be used by
professional operators.
2.3 PROHIBITED USE
Any use other than as expressly set forth in
paragraph (§ 2.2) and implemented in different
ways or contrary to what is stated in this
publication sets up the possibility of
misuse .
The manufacturer declines all responsibility
resulting from improper use which can cause
personal injury and for any malfunction of the
system.
THE FOLLOWING PROHIBITED ACTIVITIES
CONFIG. MISUSE:
•
USE the MACHINE IN EXPLOSIVE
ENVIRONMENT (THE ABOVE FACILITY IS NOT
IN COMPLIANCE WITH ATEX 2014/34/EU).
•
INTEGRATE WITH OTHER SYSTEMS AND/OR
EQUIPMENT NOT CONSIDERED BY THE
MANUFACTURER IN THE FINAL DESIGN.
•
CONNECT THE MACHINE TO POWER
SOURCE OTHER THAN THOSE SPECIFIED BY
THE MANUFACTURER.
•
USE THE MACHINE FOR A PURPOSE
DIFFERENT FROM THAT EXPECTED AND
SHOWN IN THIS PUBLICATION.
•
USE THE MACHINE INDOORS.
•
USE THE MACHINE NOT FLUSH WITH THE
WALL.
•
INFRINGE THE MAINTENANCE RULES
DESCRIBED IN THIS PUBLICATION.
•
USE THE MACHINE IN AIR CONTAINING
SMOKE,
DUST, WATER VAPOUR OR
SOLVENTS.
!
WARNING
Do not remove, damage or modify the machine identification data present on
it. In the event that data become unreadable immediately contact the
manufacturer.
Figure 2.1
1
1
2
4
5
6
3
7
8
FIG. 2.1