MBW 1741219-174999, Руководство по безопасности и обслуживанию оператора

Страница: 24 / 47

24
1. Anchor the bands (in number of 2) to
the two hooks placed at the two ends
of the device in correspondence with
the top-down hazard pictograms (fig
3.4)
Make use of hooks with safety lock
which do not allow rope slipping.
2. Use a lifting tool (crane or forklift)
connecting the appropriate organs to
3. these bands, putting cords/straps
slowly in tension.
4. It is possible to equip the machine with
an optional hook for lifting (eyebolt).
5. The lifting body must be approved for
lifting, without imbalance, a load
having a capacity greater than the
total weight of the machine.
6. Lift the machine as close as possible to
the ground and avoiding oblique lifting.
7. Carry out movements and maneuvers
supported by a person on the ground
in charge of the alerts who must keep
away from the suspended load.
3.3
TRANSPORT
Depending on the country of destination
transport can be made with different media.
The diagram below represents the most
commonly used solutions.
In the case of transport by truck always check
that the load does not protrude beyond the
outline allowed by the highway code (height 4
m, width 2, 5 m).
3.4
STORAGE
If the machine is not immediately installed, it
should be stored in an environment with the
same characteristics as the environment of
use, in particular:
!
WARNING
The slinging / transport means
must take into account the
shape and volume as well as
the mass indicated on the plate
and / or in the machine data
sheet.
Make use of ropes or straps
and lifting bodies (crane or
forklift truck) with a capacity
greater than the one to be
lifted.
!
ATTENTION
For lifting more than one meter
from the ground, remember to
remove the trowel disc before
carrying out the lifting maneuver
!
ATTENTION
Firmly anchor the load to the means
of transport in order to avoid
sudden movements.
!
ATTENTION
In the case of road transport, the
load of the vehicles must be
arranged in such a way as to
prevent the fall or the dispersion of
the same, not to diminish the
visibility of the driver or to prevent
him from the freedom of driving
movements, not to mask the lighting
devices and the visual signalling,
neither the identification plates and
signals made with the arm (highway
code art.164) and in compliance
with the provisions of Directive
2014/17/EU.
Weight: 52
kg
FIG 3.5