MBW 1741219-174999, Руководство по безопасности и обслуживанию оператора

Страница: 23 / 47

23
The operation of packing, handling, transport
and unpacking must only be carried out by
qualified personnel with perfect knowledge of
the equipment to be used and safety rules and
regulations. The means used for the handling,
lifting and transport must be intact and capable
of performing the required operations safely,
taking into account the size, weight,
projections, delicate parts and the center of
gravity of the machine. Avoid improper uses
and maneuvers, especially avoid maneuvers
outside your field of competence and
responsibility. Carry out handling and lifting
using only the recommended means by
harnessing the machines at the points
indicated.
Always wear work gloves and
safety shoes . Do not place hands or other
body parts under lifted components.
3.1
PACKING AND UNPACKING
The Trowel Machine Moskito remains intact at
the time of packaging.
It is necessary to perform these operations
when packing the machine:
•
Fold the handle by means of the
special lever (Fig. 3.1, a) and place the
blades in a horizontal position using
the adjustment knob (Fig. 3.1, b).
•
Transporting the
trowel with
inclined blades can damage the
lifting blade system.
•
Remember to replace the disc to trowel
blades to protect them from any dents
before inserting into the packaging
following the procedure given in PAR.
6.2.
•
Packing mode varies depending on
the country of destination.
•
United States: A product for each box
(fig 3.2) directly entered into the case.
•
Italy: Packing on wooden pallets
with positioning latches, cover with
polyurethane films (fig 3.3, a)
•
Other destinations: Packing of
one or more machines together
inside a single box (fig 3.3, b)
previously placed on wooden
pallets with positioning stops.
•
Lifting of the box containing the pack-
aging must be carried out from below
using an organ with a capacity suitable
for the load to be lifted (homologated
for a mass greater than or equal to that
to be lifted).
•
The weight of the packaged product
is shown in the table of general
technical features on p. 14.
3.2
LIFTING AND HANDLING
The total weight of the machine is 52 kg.
Lifting must be performed from the top.
!
WARNING
Each element of waste must be
collected
and relocated in
special container according to
the guidelines for the collection
of waste; released into the
environment can be a source of
pollution and danger.
FIG.3.2
FIG. 3.3 a
b b
a
FIG. 3.1