MBW 1741219-174999 Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 47

MBW 1741219-174999 Скачать руководство пользователя страница 33

33

Before servicing the machine, make sure you
understand  the  contents  of  this  manual.  For
questions and information please contact the
manufacturer.  Maintenance  workers  must
possess the skills required by this manual, as
well  as  mental  and  physical  requirements
necessary  and  sufficient  to  intervene  on  the
machine.

In

order

to

guarantee

the

functionality and the duration of the same, its
periodic  maintenance  must  be  carried  out
constantly,  performing  the  operations  always
in compliance with the safety prescriptions.

Only the dealer (authorized workshop) can
make  adjustments  and  interventions  that
are  not  assigned  to  the  operator.    It  is
forbidden  to  make  adjustments  and
interventions  during  machine  operation.
Before

performing

any

maintenance

operation, disconnect the machine from
power sources:

1. To stop put the accelerator to a

minimum, by acting on the throttle
lever.

2.  Release both stop levers (red ones).
3.  Close the fuel tap.
4.  Switch the engine to off (position

switch to OFF/0).

5. Carry out the maintenance operations

with the machine stopped.

1.

Thoroughly clean the trowel because

due to wear the blades can become sharper.

Therefore during maintenance check carefully

their position and adopt anti-cut gloves.
2.

If in doubt about how to perform

occasional repairs contact our support
department or authorized workshop.
3.

At the end of the work perform a

thorough cleaning from scraps.
4.

At the conclusion of the work after

cleaning, replace the trowel disc under the
blades to protect them from damage caused
by movement of the machine.

6.1

SCHEDULED MAINTENANCE

Good  maintenance  requires  steady  and
methodical control of all parts of the machine
and adjustment of the checks to its actual use.
Periodic inspections are of paramount
importance to keep the machine efficient and
reduce  repairs  and  the  dangers  that  could
result.

It is advisable to have the retailer's
technician (AUTHORIZED WORKSHOP)
perform an annual general check.

Note:

The frequency is taken into account

considering the 8-hour working day.

!

ATTENTION

During the execution of the maintenance tasks you must wear
the following PPE: CUT RESISTANT GLOVES AND SAFETY
SHOES.

For certain types of activities (supply of lubricant) make use
of airway protective equipment as indicated in the residual risks.

!

WARNING

Some operations of maintenance /
replacement of worn components can
only

be

carried

out

by

the

manufacturer's  technician.  They  are
reported later in this publication.
Please note that failure to comply with
the  requirements  of  maintenance  sets
up  the  hypothesis  of  misuse  or
prohibited

use

and

releases

the

manufacturer of all responsibility for
damage to persons and property.

FIG. 6.1

throttle lever

«
...
31
32
33
34
35
...
»

Содержание 1741219-174999
















































Отзывы:

Нет отзывов