MBW 1741219-174999, Руководство по безопасности и обслуживанию оператора

Страница: 15 / 47

15
2.5 OPERATOR POSITIONS/LAY-OUT/USE
AND MAINTENANCE AREA/
1st level OPERATOR POSITION
A single operator must work with the
machine.
He drives the machine by acting on the
handlebar to move it according to the
needs of the processing and performs
some ordinary maintenance activities.
During use the operator position is adjacent to
the handlebar of the machine.
The operator position is also considered an
inspection position from which it is possible
to oversee the smooth running of the working
cycle.
The first level operator is also responsible for
carrying out cleaning operations at the end of
use.
2nd level OPERATOR (RETAILER-
SPECIALIZED WORKSHOP)
The retailer (expert maintenance
technician) performs maintenance and repair
tasks provided by the manufacturer (compare
Chapter 6 of this publication).
Always intervenes when the machine is
stopped and energy cut.
2.6 GENERAL DESCRIPTION
The Trowel "Moskito" is dedicated to finishing
of the edges on concrete floors, resin floors
and substrates. Operation is manual.
The power supply is supplied by a an
unleaded gasoline fuelled engine.
FUNCTIONAL GROUPS
1 CONTROL LEVER (STOP)
2 LEVER AND ACCELERATOR CA-
BLE
3 HANDLE FIXING KNOB
4 AIR FILTER
5 MUFFLER
6 FUEL TANK CAP
7 INTERNAL COMBUSTION ENGINE
8 FINISHING HEADSTOCK
9 STABILIZING CIRCLE
10 ROTATING PULLEY DRIVE
11 BELT FIXING GUARD
12 TROWEL DISC
13 BLADE ANGLE ADJUSTMENT
KNOB
IMPORTANT!
To define use and maintenance
you need to about 1.5 m on all
sides of the machine (fig 2.3 on
next page).
!
ATTENTION
Only one operator is required to
drive the machine.
Tasks and positions are detailed
in para (§) 2.5 of this publication.
Failure to follow the indications
above conFIG.s the hypothesis of
misuse
and releases the
manufacturer from any liability
arising from misuse/abuse.
FIG. 2.2