MBW 1741219-174999, Руководство по безопасности и обслуживанию оператора

Страница: 34 / 47

34
OPERATION NAME
FREQUENCY
APPOINTEE
OPERATING
INSTRUCTIONS
MACHINE
ST
ATUS
MECHANICAL PARTS
Check of the
blades bolts
status and
tightening
Daily
Check the status of
the blade bolts.
Perform the
tightness daily. If the bolts
are worn, replace them.
The bolts can be replaced
by a wrench of adequate
length with the machine on
the ground, in a vertical
position.
Machine
stopped/
cut energy
Engine air filter
cleaning
Daily
Clean engine air filter,
especially when working in
dusty conditions; follow the
instructions in the engine
manual.
Machine
stopped/
cut energy
Check belt wear
status and
tension degree
(check rotor
operation)
Weekly
Follow the procedures in
para 6.2.4 in case of
breakage or significant
wear of the belt to provide
for replacement. Machine
stopped/
cut energy
Spark plug
cleaning
Weekly
If it is necessary to replace
them, refer to the engine
manual attached to this
publication.
Be careful when removing the
spark plug:
•
Remove the cap
•
Remove the spark plug
•
Wait until the engine has
cooled and then lay the
spark plug removed away
from the holder (because it
might trigger sparks).
Machine
stopped/
cut energy
Check wear of
the clutch
Weekly
In the event it is necessary to
replace the braking mass, it is
mandatory to have the dealer
intervention
(authorized
workshop)
Visual
inspection and
possible
replacement of
the trowel disc
Monthly
Visually inspect the
state of wear of the
disc surface. If the
disc has undergone an
expansion, action is needed
to replace it (SEE PAR.
6.2.3).
Machine
stopped/
cut energy