MBM FC-10, Руководство по обслуживанию

Страница: 21 / 45

20
11. CHANGING THE SYSTEM CONSTANTS
System constants are aimed at allowing users to adjust the values required for operating the collator by
themselves. While, taking advantage of them, users may optimize the machine operation according to the
environment in which it is used, erroneous setting will cause the machine to malfunction.
Closest care should be taken when system constants are changed.
.
11.1 Facts about system constants
(1) In order to move to system constants setting mode,
1) Start based on the normal mode
2) Keep pressing [0] key for three seconds
Then, the counter displays [P x] (x represents the current set value)
3)
y Press the MODE key to move to next item.
y Press the RESET key to move back to the previous item
y Press the CHECK key to make a tentative setting
(The set value will return to the initial value when the power supply is cut off).
y Press the START key to memorize the set value
(The altered value will be stored even if the power supply is cut off).