MBM FC-10, Руководство по обслуживанию

Страница: 42 / 45

41
12.17 Empty feed or jam frequently occurs.
Sheets are not neatly set on the paper feed
table.
Arrange the sheets neatly.
↓
Printing on the paper is not sufficiently dried.
Use the paper after the printing is sufficiently
dried.
↓
Paper not specified in the specifications is
used.
Use paper specified in the specifications.
↓
Edge of paper is curled.
Correct the curl.
Turn the paper over (Take that as the order of
stacking also becomes reverse).
↓
Paper feed roller is deviated from the correct
position. Install the paper feed roller in the correct
position in a straight line.
↓
Paper feed roller has been installed in the
reverse direction. Reset the paper feed roller so that its white dot
will be on its right side.
↓
Separator rubber is stained.
Clean the separator rubber using alcoholic or
detergent.
↓
Separator rubber is worn. Replace the separator rubber.
↓
Paper feed roller is stained.
Clean the paper feed rubber using alcoholic or
detergent.
↓
Paper feed roller is worn. Replace the paper feed roller.
12.18 Paper is fed aslant.
Sheets are not neatly set on the paper feed
table.
Align the sheets neatly.
↓
Edge of paper is curled.
Correct the curl.
Turn the paper over (Take that as the order of
stacking also becomes reverse).
↓
There is an opening between the paper and
paper feed guide.
Fit the paper feed guide to the paper closely.
↓
Paper feed roller is deviated from the correct
position. Install the paper feed roller in the correct
position in a straight line.