MBM FC-10, Руководство по обслуживанию

Страница: 28 / 45

27
In such a case, the occurrence of an error may be suppressed by adjusting the system constant n.
Indication
Counter Contents of indication
Operation Remarks
1000 digit n －
100 digit
10 digit
1 digit
Paper ejection response
wait time
Ten-key
Note:
When the system constant L to adjust the paper feed interval is set to a large value, the wait time for the
next paper feed (system constant L) may exceed the paper ejection response wait time (system
constant n). In such a case, a left error will occur though the paper process has been normally
performed. Set the system constant n value to “System constant L + 1.0” or more.
The system constant n varies depending on the connected device.
•
Basic value: [n 5.0].
•
When a stapler-puncher or large-capacity stacker is connected: [n 3.0]
5. Changing the paper interval between stations at connection with after processing machine
(System constant G)
When the booklet maker is connected, the interval of paper feed timing with the next station can be changed.
In some case, it may be necessary to determine which should first come out, the paper from the top station
or the paper from the bottom station. In this case, it may be attained by operating the system constant G.
1 Aligning the paper ends
When the system constant G is set to 180
for the 60 Hz regions, paper will come out
with the paper ends almost aligned.
1
3
2
4
1
2
3
4