Fig. 1-4
Fig. 1-5
Fig. 1-6
Push-pin
3) Remove passenger-side scuff plate.
a) Use fiberstick to disengage clips.
(Fig. 1-4)
4) Remove passenger-side kick plate.
a) Use 4mm screwdriver to release center
of plastic pushpin.
b) Grasp kick plate at rear and pull out
towards rear of vehicle.
(Fig. 1-5)
5) Loosen passenger side door seal past top
of A-pillar. (Fig. 1-6)
6) Remove A-pillar trim.
a) Pull out top of A-pillar trim towards
driver side of vehicle until A-pillar push-pin
connector is fully extended.
(Fig. 1-7)
b) Pull A-pillar trim towards the rear of the
vehicle to release the base and to slide up to
release from A-pillar push-pin connector.
(Fig. 1-7)
CAUTION
!
CAUTION
!
A-pillar
Push-pin
Connector
Fig. 1-7
Do not use excessive force. A-pillar connector could be damaged.
Page 3 of 13
Revision A
550-0339
