background image

Installation and Operational Instructions for

 

ROBA

®

-brake-checker plus AC Type 029.700.2 

(B.0297002.EN)

your reliable partner

26/06/2019 HH/GF

Page 2 of 10

Chr. Mayr GmbH + Co. KG
Eichenstraße 1, D-87665 Mauerstetten, Germany
Tel.: +49 8341 804-0, Fax: +49 8341 804-421

www.mayr.com

, E-Mail: 

[email protected]

22

Safety and Guideline Signs

DANGER

Immediate and impending danger, which 
can lead to severe physical injuries or to 
death.

CAUTION

Danger of injury to personnel and damage 
to machines.

Guidelines on important points

General Safety Guidelines

DANGER

Danger of death! Do not touch voltage-
carrying lines and components.

DANGER

Danger of burns when touching hot 
surfaces.

CAUTION

•  Danger of device failures caused by 

short-circuits and earth short-circuits at 
the terminals

•  Electronic devices cannot be guaranteed 

During the risk assessment required when designing the ma-
chine or system, the dangers involved must be evaluated 
and removed by taking appropriate protective measures. 
To prevent injury or damage, only professionals 
and specialists are allowed to work on the devices. 

 

They must be familiar with the dimensioning, transport, in-
stallation, initial operation, maintenance and disposal ac-
cording to the relevant standards and regulations.

Before product installation and initial opera-
tion, please read the Installation and Opera-
tional Instructions carefully and observe the 
Safety Regulations. Incorrect operation can 
cause injury or damage.

General Safety Guidelines

Only carry out installation, maintenance and 
repairs in a de-energised, disengaged 
state and secure the system against inad-
vertent switch-on.

22

Содержание 029.700.2











Отзывы: